Sunday, January 27, 2008

Opel Manta












The Opel Manta was a rear-wheel-drive sports coupé motor vehicle built by Opel, a subsidiary of General Motors, from 1970 to 1988.

Content

[edit] 1970–75: Opel Manta A

Opel Manta A
Opel Manta A
Production 1970–1975
Engine(s) 1.2S 44 kW (60 hp)
1.6N 44 kW (60 hp)
1.6S 55 kW (75 hp)
1.9S 66 kW (90 hp)
1.9E 77 kW (105 hp)
Transmission(s) 3-speed automatic
4-speed Manual Gearbox
Curb weight 970 kg (2138 lb)
Fuel capacity 45 L (9.9 Imp. gallons)
(11.9 U.S. gal)

The Manta A was released in 1970, based on the Opel Ascona of the time, as a competitor to the Ford Capri. It was a two-door "three-box" coupé, and featured distinctive round tail lights, quite similar to the Opel GT and in fact were used on the GT in 1973, its final model year. Unusually for the UK, the car was sold as an Opel rather than having a Vauxhall-branded equivalent.

The sales approach for the Opel line in the U.S. Market was equally odd. The Manta A was one of only a few Opel models sold in the U.S. Market. Opels were imported by GM and sold through Buick dealerships and not their own dealership network, so they were limited in what makes and models they could sell here. Other Opel makes sold in the U.S. market were the 1956–61 the Rekord P1 and Rekord P2, the Kadett A (1964–66), Kadett B (1967–71), GT (1969–73), Manta / Ascona A (1971–75). The Ascona A, was the sedan version of the Manta A chassis and was sold in the U.S. under the 1900 name as a 2 door & 4 door sedan and 2 door "Sport Wagon". The only difference between the Ascona and Manta was exterior sheet metal, glass and trim. The frame, all the mechanicals, dash, front seats, and many other parts were shared between the cars. The Manta was even sold in 1971 and 1972, as the 1900 Sport Coupe, not the Manta. In 1973 the Manta nameplate was added to the U.S.-spec Mantas, but the Asconas kept the 1900 badge throughout their model life. The last year GM imported European made Opels into the United States, under their marquee, was 1975. In that year the only Opels imported were the Manta & Ascona A.

The Manta was normally equipped with a 1.6–1.9 litre CIH engines, although in Europe a small 1.2 litre motor was offered. All Mantas sold in the U.S. had the 1.9L and larger heavy duty radiator (an option on European models). It came with either a 4 speed manual or an optional 3-speed TH-180 automatic. The Manta was known to be one of the best handling cars in its class and went on to win a large number of rallies in Europe and the United States.

In the U.S. Market, there was a sport model known as the Rallye from 1971-74. The "Rallye" model was overall an appearance and gauge package, the most noticeable difference was the addition of a Black Hood and on 1970-73 models addition of fog lamps. Mechanically the only difference was the gear ratio in the models with manual transmissions. In 1973 and 1974 there was also the "Luxus" model which included "refinements" like corduroy seats, colour-coded interiors (blue or burgundy), and faux wood panelling. The only special edition Manta ever produced for the U.S. market was the "Blue Max" in 1973, this amounted to a blue 1973 Luxus model, with a unique dark blue vinyl roof, mechanical sunroof, and automatic transmission.

In 1975, All Manta and 1900 models were equipped with the Bosch L-Jetronic fuel injection in the United States due to emission regulations. Yet in Europe this feature was only available on the high end GT/E Models, which also sported fog lamps and a lower front spoiler, which was not offered on any of the U.S. Spec Manta models. Also of note is that the 1974–75 Opel Manta Models sported large aluminium 5 mph (8 km/h) bumpers to comply with U.S. crash standards of the time; the European Mantas did not receive the large bumpers.

The European market had a number of different versions of their own. Most were basic trim packages, the most popular being the "Berlinetta", which was similar to the "Luxus" but included rubber trim on the bumpers (standard on all 1973 U.S. Opel Mantas), vinyl roof, and other misc. features. The one major exception being in 1975 Opel offered the GT/E and a number of special editions based on the GT/E. The GT/E was a fuel injected version of the European 1.9L and the performance figures were very impressive for the time. Most notable special editions models based on the GT/E were the “Black Magic” (with black & plaid interior), and the “Swinger” edition in white with an equally odd interior choice.

Special Opel Manta A-series cars

There were two different special models made of the Manta A. The primary objective was to up the power of the car. Both projects started approximately at the same time (around 1972–73). There was the Turbomanta and the TE2800.

The Turbomanta is the most rare of the two. Production was a total of 33 cars ever made, whereas the 5 of them was the prototypes, and the ones used for public relations.

The Turbomanta is actually a 1973 SR with a 1.9 litre "S" spec engine, originally putting out 90 bhp (67 kW). The British company "Broadspeed" was chosen to build the turbo cars, and eventually started building 5 left hand drive cars for the German Opel AG. These cars were only meant as prototypes. Broadspeed came up with a somewhat special solution, and used a combination of a Holset 3LDG turbocharger, and a carburettor mounted inside a big plenum chamber. The engine itself was fitted with a thicker copper head gasket, and as such the compression ratio was lowered to 7.6:1. The outcome was a 1.9 litre engine which put out a staggering 156 bhp (116 kW), and more impressive was the acceleration. 0–60 was done in only 7.6 seconds, faster than most "supercars" at the time like the Porsche 911. All 5 cars were in GM "signalgelb" sunflower yellow, and had a large black stripe on the side, where a sign said "TURBOMANTA". The downside to this was fuel consumption. The turbocharger had halved the economy of the car, and building it was also a thing that cost a lot. Therefore Opel closed the project, leaving the 5 cars as the total production number. However a British engineer at the D.O.T (Dealer Opel Team, which was the British importer and builder of Opel cars in Britain) was so enthusiastic about the cars that he had D.O.T. build an additional 28 cars. The cars were all based on the 1974 Berlinetta model, which was the luxury model, with a full gauge pack, automatic transmission, and alloy wheels. All 28 cars were black, with vinyl roofing. The only thing identifying that the car was indeed a Turbo Manta was a small sign at the rear quarter of the rear wings saying "turbo". Very few of these cars still remain today.

The TE2800 was a totally different project. Actually the TE2800 wasn't really an Opel as Opel had nothing to do with the project. A Belgium company called Transeurop Engineering also wanted to up the engine power of the Manta A. Opel had previously tried a 6 cylinder engine layout already in 1971 and 72, but with no success. The cars were rendered to expensive to build, and the market was overwhelmed at the time with big engine cars. But Transeurop Engineering did not agree. They basically took a 2.8 litre CIH type engine from the Opel Commodore 2.8GS model and fitted it into the engine bay of the Manta 1.9SR. A lot of problems occurred. The radiator, the bonnet, the entire front end of the car, the rear axle, the transmission, it all needed to be changed. To solve this fast Transeurop Engineering tried to get Opel to join the project using Opels earlier experiences with the transformation, but with no luck. Even worse Opel didn't even want the Opel brand on the cars, if the project ever became a success. Transeurop Engineering therefore turned to Opel's number one tuner of the time Steinmetz. Steinmetz supplied the new fibreglass bonnet with a large bulk on it to give room to the engine, a set of widened arches, and a special front bumper integrated with the lower front spoiler, to make room for the dramatically changes that needed to be made to the cars front end construction. Several of this was cut out and replaced with other parts being mounted further to the ground to give room for the radiator. A closed radiator system was installed so that the radiator had a water tank in the engine bay (like we know it from modern cars today). The engine was still the 2.8 litre unit from the Commodore GS and this was originally fitted with 2 Zenith carburettors. The output was 142 bhp (106 kW), and with the Commodore 4 speed manual gearbox and a 3,18:1 rear axle the car went from 0–60 mph in just 7.5 seconds. A total of 79 cars were made and sold through Steinmetz in Germany branded not as a Opel but as a TE2800. All Opel brands was removed from the cars and replaced by the logo "TE".

Steinmets offered a tune-up for rally and motorsport use. The tuneup consisted of porting and flowing the head, higher compression ratio, a race spec camshaft, and triple carburettors, giving the car a total of up to 230 bhp (172 kW).

No doubt that the TE2800 is the fastest Manta A ever made, even though officially it isn't an Opel. It could outpower cars like the 911 Carrera of 1973 and the BMW2002 turbo from 1973, even though those cars had more engine power. The low weight of the Manta bodyshell, and the combination of the right gear ratios, was what gave the car its success. Unfortunately Opel was right though. The cars were too expensive costing almost twice the price of a 105 bhp (78 kW) GT/E in 1975. Very few of these cars exist today, as most were used in rally and motorsport events.

1975–88: Opel Manta B

Opel Manta B1
Opel Manta B
Production 1975–1981
Engine(s) 1.2S(44kw/60PS), 1.6N(44kW/60PS), 1.6S(55kw/75PS), 1.9N(55kw/75PS), 1.9S(66kW/90PS), 1.9E(77kW/105PS) 1.3N(44kW/60PS), 1.3S(55kW/75PS), 1.6N(44kW/60PS), 2.0N(66kW/90PS), 2.0S(74kW/100PS), 2.0E (81kW/110 PS)
Transmission(s) 3-speed automatic optional
4-speed Manual Gearbox
Opel Manta B2
Production 1982–1988
Engine(s) 1.8L 90 DIN HP
2.0L 110 DIN HP
Transmission(s) 3-speed automatic optional
4-speed Manual Gearbox
5-speed GETRAG Sports Gearbox
Wheelbase 99.1 in (2517.14 mm)
Length 175.0 in (4445 mm)
Width 66.4 in (1686.56 mm)
Height 52.8 in (1341.12 mm)
Curb weight 2347.9 lb (1065 kg)
Fuel capacity 50 L (11 Imp. gallons)
(13.2 U.S. gal)

The second car to use the Manta name was launched in 1975. This two-door "three-box" car was mechanically based directly on the then new, redesigned Opel Ascona, but the overall design was influenced by the 1975 Chevrolet Monza. The Manta had more "sporty" styling, including a droop-snoot nose not seen on the Ascona, although it was standard on the UK version of the Ascona, the Vauxhall Cavalier. There was still no "Vauxhall Manta", with the car remaining an Opel in the UK. However, a Vauxhall Cavalier was available with the same coupé bodyshell.

Engines where available ranging from the small 1,2 litre OHV engine, the 1,6 litre CIH and the 1,9 litre CIH. Also in 1976 the GT/E engine from the Manta A series was adapted into the Manta B programme spawning the GT/E Manta B series. In 1979 the GT/E had the engine replaced with the new 2,0 litre CIH and with a new designed Bosch L injection system. Power output was now 110 bhp (82 kW). The 1.9 litre engine gave way to the 2,0 litre S engine which was aspirated by a Varajet II karburettor. This engine was the most used engine by Opel at the time, and was to be found in several Opel Rekord cars.

In 1977, a three-door hatchback version appeared to complement the existing two-door booted car. This shape was also not unique, being available on a lower-performance Vauxhall Cavalier variant.

Both Manta versions received a facelift in 1982, which included a plastic front spoiler, sideskirts for the GT/E and GSi models, a small wing at the rear and quadruple air intakes on the grille. Also the 1.2, 1.6 and 1.9 litre engines were discontinued and replaced by the 1.3 litre OHC engine, and the 2.0 litre S and E engines. The GT/E was renamed and was called the GSi from 1983.

Production of the Manta continued well after the equivalent Ascona and Cavalier were replaced by a front wheel drive model "Ascona C". In 1982 the 1,8 litre OHC engine from the Ascona was fitted in the Manta B making a more economical Manta B to drive. It could run 14km per litre and use unleaded fuel. The 1,8 was very popular and was in production for 5 years (1982-1987). The 2,0S models where discontinued in 1984 and only the GSi was available with the "large" engine. In 1986 Opel released the last Manta B model the Exclusive, giving it all of the best in equipment. Recaro seats with red cloth, grey leather like interior and the full bodypack known from the i200 models. This consisted of twin round headlights in a plastic cover, frontspoiler and rear lower spoiler from Irsmcher, sideskirts and the known 3 split rear spoiler of the Manta 400 (producing 80 kg (176 lb) of weight on the rear at 200 km/h). Opel finally ceased the production of the Manta B in 1988, only producing the GSi exclusive the last 2 years. Sales continued in 1989 until the Manta was replaced by the Opel Calibra (known as the "Vauxhall Calibra" in the UK).

Today, these cars are hard to find in an original, good condition; consequently the value has risen considerably over the last few years. It has again become popular, because of its good looks and well-respected handling.

Rally and special versions

In 1979 work began on a rally-spec Opel. Both the Ascona B and the Manta B were used for this. Although the Ascona B 400 model was the most successful of the two, the fact still remains that the Manta 400 was a remarkable car.

Opel joined forces with German tuner Irmscher and Cosworth in Britain, to make the 400. Cosworth was given the task to develop a 16 valve 2 cam head for the CIH spec engine block, and Irmscher who earlier in 1977 and 78 had proven that they knew their way around an Opel building the i2800, was to design the exterior and interior of the cars. The results were not bad. Opel however had problems with the engine. The first idea of using a 2,0 litre engine and then using the 16 valve head from Cosworth simply didn't give enough power. The problem was that the heads had already been build, so the heads were made to fit on the CIH type 4 cylinder engine block. So they built an unusual engine using a 2,0 litre engine block with an overbore and larger pistons, a crankshaft from the 2,3 litre diesel engine of same type (CIH) and ended with a 2,4 litre engine block. Mounting the 16 valve head on this gave a massive output, and the opportunity to make several tune-ups for the rally drivers. Opel delivered the first 23 specimens in 1981 which were recognizable by the 2 slot front grille (1982, 83, and 84 models had 4 slot grilles). The cars were delivered as both street cars and factory tuned rally cars. The streetcars known as Phase 1 cars, were luxury versions of the known Manta B Coupé. Although all the changes to give the body more strength were still implemented, the cars were delivered with all kinds of exclusive packaging. Recaro seats with big Opel badges on the cloth, Irmscher leather steering wheel, and even front light washers were mounted. The cars were all delivered in Arctic White colour, with White Ronal lightweight 7x15" alloys. The engine was fitted with a Bosch LE injection system and power output was 144 bhp (107 kW). The Phase 2 however was quite different. It had large extended arches front and rear made of exotic materials like carbon and kevlar to keep the weight down, lightweight doors, bonnet, spoilers and windows. The wheels were still from Ronal but now measuring 8x15" front and 10x15" rear. The engine output was 230 bhp (172 kW) using a set of 48mm DCOE style carburettors, and the cars could be delivered with different gearboxes from ZF and with different rear axle options like LSD. Phase 3 which is also a term used when talking about the i400's was not a factory tune-up. Many racers of the time had their garages tune up the engine even further. Some made it across the 300 bhp (220 kW) mark and even today, engines can be tuned to deliver just over 340 bhp (254 kW) still normally aspirated.

Russell Brookes' Manta 400 rally car.
Russell Brookes' Manta 400 rally car.

The i400 was produced in a total of 245 specimens following the homologation regulations by FISA (today FIA). But the i400 also spawned some other "i" models. The i200 which basically was a GSi model Manta B was made in 700 specimens and is still today considered a collectors item. The i200 used a tuned 2,0E engine delivering 125 bhp (93 kW). The i240 which is rarer was only produced in 300 specimens and was fitted with the i400 engine block but using a normal 8 valve cast iron head from the 2,0E engine delivering 125 bhp (93 kW).

Also Irmscher themselves tried building the Manta with their own specs. The reason they were used for the 400 project was that in 1977 they had taken a 1977 Manta B 1,9S and put in a 2,8 litre H spec engine from the Opel Admiral of that time. Success was limited though and the cars were on display in the 1977 Geneva car show. The cars had been painted in some special colours giving it the nickname "paradisvogel" because of the rainbow like colour theme on the cars. However they did produce 28 specimens with the 2,8H engine delivering 150 bhp (112 kW) and 220 N·m (162 ft·lbf). The cars are considered extremely rare today.

After the success of the 400 (and i200/240) Irmscher once again tried the 6 cylinder layout. This time producing the most powerful Manta B ever released on the public market. In 1985 Irmscher bought 29 400 cars from Opel, which were on stock. The cars had no gearbox or engine but were fitted with the Phase 2 equipment. Irmscher installed the new 3,0 litre LE engine from the Monza and Senator models, which delivered 177 bhp (132 kW) and 232 N·m (171 ft·lbf). Power was transmitted to a big GETRAG 265 gearbox, onto a 3,18:1 LSD rear axle, giving the car some awesome specifications. 0-60 mph was over with in just 8 seconds flat and the car topped out at 225 km/h (140 mph) making it the fastest street Manta ever built. If not for the big 1980s fuel crisis being at its worst at that time, several are sure that Opel would have adapted the idea and built a series of 6-cylinder Manta's. But instead they chose to build the economically more affordable Manta B with a 1,8 litre alloy head OHC style engine in 1985.





Convertible versions

GM, from 1978 until 1979, offered the Cavalier Coupe in convertible format called the Centaur. Only 118 of these were made and less than 30 are believed to survive as of 2007. About a quarter of these conversions used Manta Coupes. The cars were developed by Magraw Engineering and sold through Vauxhall dealerships on behalf of Crayford.

Ford Taunus











Ford Taunus
was a large family car sold by Ford in Germany and other countries. Some versions were similar to the Ford Cortina in the United Kingdom. The model line was named after the Taunus mountain range in Germany and was first made in 1939 and continued through several versions until 1982.

Contents

[hide]

[edit] Taunus G73A/G93A (1939–1942)(1948–1952)

1949 Ford Taunus
1949 Ford Taunus

The original Taunus was a development of the Eifel and used the same 1172 cc four cylinder engine but in a longer chassis and a streamlined body. It was the first German Ford to have hydraulic brakes. Due to the war, production was interrupted from 1942 to 1948. 74,128 were made including estate cars and light vans.

[edit] Taunus M-series (1952–1968)

From 1952 to 1968 all German Fords were called the Taunus, using the model names 12M, 15M, 17M, 20M, and 26M. The "M" is said to stand for "Meisterstück", in English "Masterpiece". Taunus was also sometimes adopted as the brand-name in export markets, particularly where British and North American Fords were also available.

The 12, 15 and 17M models had a straight-4, later ones a V4 engine. The 20 and 26M models had a V6 engine. The 12, 15, 17 etc. refer to the engine displacement; 1200, 1500, 1700 cc etc.

From 1962 to 1970, the smaller models 12M (P4) and 12M/15M (P6) had front wheel drive. All other models had rear wheel drive.

The following models were offered:

[edit] Smaller line: 12M, 15M

[edit] First generation 12M (G13) (1952-1959), 15M (1955–1959)

Ford Taunus 12M 1952-1955
Ford Taunus 12M 1952-1955

The first new German Ford after World War II. New pontoon body, similar in style to British Ford Zephyr. 12M maintains the old sidevalve engine of the Taunus, 15M uses a new and more powerful engine:

  • 12M: 1172 cc, 38 hp (28 kW), 112 km/h (70 mph)
  • 15M: 1498 cc, 55 hp (40 kW), 128 km/h (80 mph)

Body styles were two door sedan, two door station wagon and sedan delivery.

[edit] Second generation 12M (1959–1962)

Ford Taunus 12M 1959-1962
Ford Taunus 12M 1959-1962

Not a new car, but a rework of the 1952 model. All cars are called 12M, though both engines are continued (the car with the bigger engine is called "Taunus 12M 1.5 litre").

Body styles were the same as in the 1952 model.

[edit] Third generation 12M (P4) (1962–1966)

Ford Taunus 12M P4
Ford Taunus 12M P4

Same size, but a completely new car. New body, new V4 engine, front wheel drive. The first Ford car with front wheel drive (second is Ford Corcel, third is Ford Fiesta). Engines:

  • 1.2 litre: 1183 cc, 40 hp (29 kW), 123 km/h (77 mph)
  • 1.5 litre: 1498 cc, 50, 55 or 65 hp (37, 40 or 48 kW), 135, 139 or 144 km/h (84, 87 or 90 mph)

Body styles were two door sedan, four door sedan, two door coupé, two door station wagon and sedan delivery.

[edit] Fourth generation 12M (P6) (1966–1970), 15M (P6) (1966–1970)

1969 Ford 12M P6
1969 Ford 12M P6

New body, engines and platform are continued. Again, the car with the bigger engine is called 15M. Engines:

  • 12M 1.2 litre: 1183 cc, 45 hp (33 kW), 125 km/h (78 mph)
  • 12M 1.3 litre: 1305 cc, 50 or 53 hp (37 or 39 kW), 130 or 134 km/h (81 or 84 mph)
  • 15M 1.5 litre: 1498 cc, 55 or 65 hp (40 or 47 kW), 136 or 145 km/h (85 or 90 mph)
  • 15M 1.7 litre: 1699 cc, 70 or 75 hp (51 or 55 kW), 153 or 158 km/h (95 or 98 mph)

Body styles were unchanged from the P4.

In 1970, the P6 is replaced by the Taunus TC (see below).

[edit] Bigger line: 17M, 20M, 26M

[edit] First generation 17M (P2) (1957–1960)

Ford Taunus 17M P2
Ford Taunus 17M P2

Growing wealth in postwar Germany encourages Ford to offer a line of bigger and more expensive cars. Same size as British Consul Mk2, but a different car. Style similar to American 1956 Ford. The P2 uses a ohv engine with 1698 cc and 60 hp (44 kW). It can do 128 km/h (80 mph).

[edit] Second generation 17M (P3) (1960–1964)

1961 Ford Taunus 17M P3
1961 Ford Taunus 17M P3

Completely new body in very modern style. Engine is now offered in three sizes:

  • 1.5 litre: 1498 cc, 55 hp (40 kW), 136 km/h (85 mph)
  • 1.7 litre: 1698 cc, 60 or 65 hp (44 or 48 kW), 138 or 140 km/h (86 or 88 mph)
  • 1.8 litre: 1758 cc, 70 or 75 hp (51 or 55 kW), 148 or 154 km/h (92 or 96 mph).

A very successful car.

[edit] Third generation 17M (P5) (1964–1967), 20M (P5) (1964–1967)

1966 Ford Taunus 20M P5
1966 Ford Taunus 20M P5

New body, new engines. 17M now gets a V4 engine:

  • 1.5 litre: 1498 cc, 60 hp (44 kW), 140 km/h (88 mph)
  • 1.7 litre: 1699 cc, 65 or 70 hp (48 or 51 kW), 145 or 150 km/h (91 or 94 mph).

New 20M gets a V6 engine with 2.0 litres (1998 cc) and 85 or 90 hp (63 or 66 kW) with a top speed of 158 or 161 km/h (99 or 101 mph). Again, a good selling car.

[edit] Fourth generation 17M (P7) (1967–1968), 20M (P7) (1967–1968)

New body, engines and platform are continued. Very big, very boxy, very American. Not the car which European car buyers desire. A complete failure.

The engines of the 17M/20M P5 are continued with only one addition on the top end. It is the

  • 20M 2.3 litre: 2293 cc, 108 hp (79 kW), 170 km/h (106 mph).

[edit] Fifth generation 17M (P7.2) (1968–1971), 20M (P7.2) (1968–1971), 26M (1969–1971)

1969 Ford 20M XL P7.2
1969 Ford 20M XL P7.2

Shrinking sales of the P7 are forcing Ford to offer a restyled car only one year later. Ford is so ashamed by the failure of the last year's model that the new car is again called P7. Here, to avoid confusion, it is called P7.2, sometimes it is called P7b. 26M, introduced in 1969, is the top of the line version with the biggest engine (2.6 litres) and the most luxurious trim level. The engin program is enlarged; now there are two base engines (V4 and V6) in six displacement sizes and nine power stages:

  • 17M 1.5 litre: 1498 cc, 60 hp (44 kW), 135 km/h (85 mph)
  • 17M 1.7 litre: 1699 cc, 65 or 75 hp (48 or 55 kW), 140 or 150 km/h (88 or 94 mph)
  • 17M 1.8 litre: 1812 cc, 82 hp (60 kW), 153 km/h (96 mph)
  • 20M 2.0 litre: 1998 cc, 85 or 90 hp (63 or 66 kW), 155 or 160 km/h (97 or 100 mph)
  • 20M 2.3 litre: 2293 cc, 108 or 125 hp (79 or 92 kW), 170 or 180 km/h (106 or 112 mph)
  • 20M 2.6 litre, 26M: 2550 cc, 125 hp (92 kW), 180 km/h (112 mph)

Please note: The 17M 1.8 litre uses a V6 engine. The 2.6 litre engine is optional on 20M, but standard on 26M.

This is the last specifically German Ford. In early 1972, it is replaced by the new Consul and Granada.

[edit] Taunus TC (1970–1976)

1970 - 1976 Ford Taunus Saloon (pre facelift)
1970 - 1976 Ford Taunus Saloon (pre facelift)
1974 Ford Taunus Coupé
1974 Ford Taunus Coupé

In 1970 a new Taunus, the Taunus TC, was introduced, as a two- or four-door sedan, station wagon (or Turnier) and coupé. It was very similar to the British Ford Cortina Mk III, having been developed under the auspices of Ford of Europe, and many components were identical (TC means "Taunus Cortina", to show the similarity of the cars). The 1976 Taunus and Cortina models were identical in all but name, 'Taunus' being the name used in left hand drive (LHD) markets, and 'Cortina' in right hand drive ones, although the Cortina name was used in LHD South Korea and Taiwan. The Mk III was also sold in Scandinavia, alongside the Taunus.

The Ford Taunus TC series was conceived in the late 1960s to be a "world car" alongside its technical sibling the Cortina Mk III, with construction and design work taking place on both sides of the Atlantic. As with the design of the first generation, it was done under the supervision of Semon "Bunkie" Knudsen, of former General Motors fame. The car is often nicknamed "Barock 2" (pointing back to the Taunus P2 series of the late 1950s, commonly known as the "Barock-Taunus") or "The Knudsen Nose" by its German owners because of the pointy hood scoop that, as the legend has it, was put there on direct order from Knudsen. Otherwise the major design work is rumoured to have been done by Italian car designer Luigi Colani, who also did design concepts for BMW's motorcycle division in the late 1970s.

[edit] Taunus Mark III (1976–1982/1994)

Ford Taunus 1979-1982
Ford Taunus 1979-1982

As from the 1976 model year the Taunus and Cortina were essentially the same cars. The Taunus TC along with the Cortina Mk III and their successors have been produced in slightly updated forms in Europe, Argentina and Asia (some Cortinas were built under license by Korean automaker Hyundai) with the last Turkish Otosan-Taunus leaving the factory in the mid-nineties. However the major components remained basically the same through the entire production run only receiving minor body changes with the biggest re-engineering in the 1979 model year, which involved a facelift (identical to the Ford Cortina Mk5 update).

The 1979-82 series shared a good deal of its mechanics with the first generation Ford Sierra.

The Taunus and Cortina series are very easy to service and share a lot of mechanical components with the other European Ford cars of the period (excluding the Ford Fiesta), making them extremely easy to fix.

In 1982 production of the Taunus ceased in Europe, and was replaced by the Ford Sierra. Production continued in Argentina, where it also featured automatic transmission as optional, which had a local coupé version until 1984, and Otosan in Turkey, where a restyled version of the last model continued in production until 1994.

Ford Capri



















Ford Capri was a coupé style car from Ford of Great Britain sold between 1962 and 1964. Greater commercial success was enjoyed by the Capri produced by Ford of Europe from 1969 to 1986, and in Australia between 1969 and 1972. A third completely different vehicle bearing the name was produced by Ford in Australia from 1989 to 1994. Across these markets, three fundamentally different Ford models bearing the name Ford Capri were built, and these in various versions. There had previously been a Capri from the Lincoln division of Ford USA in 1952, though this was never badged as a Ford Capri.

Contents

Ford Consul Capri
Production 1961-1964
Body style(s) 2-door coupé
Engine(s) 1340 cc Straight-4 ohv
1961 - 1962
1498 cc Straight-4 ohv
1962 - 1964
Wheelbase 99 in (2515 mm)[1]
Length 170.75 in (4337 mm)
Width 65.3 in (1659 mm)
Curb weight 2100 lb (953 kg) approx
Related Ford Consul Classic

The first use of the name Capri by Ford of Great Britain was for a 2 door coupé version of the Ford Classic saloon. The Ford Consul Capri was introduced in 1961 but only officially went on sale in Britain in January 1962: it was discontinued in July 1964. Along with the Ford Classic it offered many then unusual features, such as four headlights, variable speed wipers, disc brakes, dimming dashboard lights, and a cigar lighter. It was proclaimed as "The First Personal car from Ford of Great Britain" (Ford of Great Britain, sales literature, December 1961) and its style was inspired by late 1950s United States car designs with rear fins. It had sweeping lines, a large boot space and a pillarless coupé roof. Initially available with a 1340 cc engine on 3 main bearings(model 109E): engine capacity was increased in August 1962 to 1498 cc (model 116E). The first 200 Capris were hand-made left-hand-drive cars for continental Europe. In Germany at the 1961 Frankfurt Auto Show, Ford sold 88 Capris. From 1961 to 1964 only 500 Capris were sold. The oldest of these handmade Capris from 1961 are in Germany. The Consul Capri 335 is one of the rarest cars from Ford.

In 1963 a GT version (also 116E; the same engine as in the Cortina GT) was introduced. Overall car was very expensive to produce and in the latter part of it's production was running alongside the very popular Ford Cortina, sales were disappointing and the Consul Capri was removed from sale after just two and a half years.

[edit] Ford Capri Mark I (1969–1974)

1974 Ford Capri 3.0 GXL
1974 Ford Capri 3.0 GXL
Hans Heyer 1973 with Ford Capri at the Nürburgring
Hans Heyer 1973 with Ford Capri at the Nürburgring

The first "Ford Capri" to bear that precise name was introduced in January 1969 at the Brussels Motor Show, with sales starting the following month. The intention was to reproduce in Europe the success Ford had had with the North American Ford Mustang; to produce a European pony car. It was mechanically based on the Cortina and built in Europe at the Dagenham and Halewood plants in the United Kingdom, the Genk plant in Belgium, and the Saarlouis and Cologne plants in Germany. The car was named Colt during development stage, but Ford were unable to use the name, as it was trademarked by Mitsubishi.

Although a fastback coupé, Ford wanted the Capri Mark 1 to be affordable for a broad spectrum of potential buyers. To help achieve that, it was available with a variety of engines. The British and German factories produced different line-ups. The continental model used the Ford Taunus V4 engine in 1.3, 1.5 and 1.7 L displacement, while the British versions were powered by the Ford Kent straight-4 in 1.3 and 1.6 L form. The Cologne V6 2.0 L served as initial range-topper. Until the end of the year, new sports versions were added: the 2300 GT in Germany, using a double-barrel carburettor and 125 PS (92 kW), and the 3000 GT in the UK, with the Essex V6, capable of 138 hp (103 kW).

In April 1970, Ford began selling the Capri outside Europe, in the North-American, South African and Australian markets. These versions were powered solely by the underpowered Kent 1.6 engine, but a Pinto straight-4 2.0 L replaced it in 1971. The North American version featured new headlights and bumpers, and carried no brand badge.

A new 2637 cc version of the Cologne V6 engine assembled by Weslake appeared in September 1971, powering the Capri RS2600. This model used Kugelfischer fuel injection to raise power to 150 PS (110 kW), and was the basis for the Group 2 RS2600 used in the European Touring Car ChampionshipFitted with the Weslake engine featuring their special all alloy cylinder heads. The RS2600 also received modified suspensions, a close ratio gearbox, lightened bodywork panels, ventilated disc brakes and aluminium wheels. The 2.6 L engine was detuned in September for the deluxe version 2600 GT, with 2550 cc and a double-barrel Solex carburettor.

Mark I facelift

Ford Capri 1973
Ford Capri 1973

The Capri proved highly successful, with 400,000 cars sold until 1970, and Ford revised it in 1972, to become what is known by enthusiasts as the Capri "Bis" or, in the UK, the "Mark 1 facelift" Capri.[citation needed] The car received a new and more comfortable suspension, rectangular headlights, enlarged taillights and new seats. The Kent engines were replaced by the Ford Pinto engine, and the previously UK-only 3000 GT joined the German lineup. In the UK the 2 litre V4 remained in use. The following year, 1973, saw the highest sales total the Capri ever attained, at 233,000 vehicles, and the 1,000,000th Capri sold in August.

In December, Ford replaced the RS2600 with the RS3100, with the Essex V6's displacement increased to 3098 cc. Unlike its predecessor, it used a double-barrel Weber carburettor, and reached the same 150 PS (110 kW). However, the car was still competitive in touring car racing, and Ford Motorsport produced a 100-model limited edition with this new engine. The Group 4 RS3100’s engine was tuned by Cosworth into the GAA, with 3412 cc, fuel injection, DOHC, four valves per cylinder and 435 hp (324 kW) in racing trim. The car also featured improved aerodynamics. Besides the racing RS3100, the GAA was also used in Formula 5000.

Ford Capri Mark II (1974–1977)

Ford Capri 1974
Ford Capri 1974

In February 1974, the Capri Mark 2 was introduced. After 1.2 million cars sold, and with the 1973 oil crisis, Ford chose to make the new car more suited to everyday driving, with a shorter bonnet, larger cabin and the adoption of a hatchback rear door. By the standards of the day the mk2 was a very well evolved vehicle with very few reliability issues.

Although it was mechanically similar to the Mark 1, the Capri 2 had a revised larger body and a more modern dashboard including a smaller steering wheel. The 2.0 L version of the Pinto was introduced in the European model, and was placed below the 3.0L V6, although it was more powerful. The Capri still maintained the large square headlights, which became the easiest way to distinguish between a Mark 2 and a Mark 3. Larger disc brakes and a standard alternator finished the list of modifications.

In order to keep the sporty appeal of the car, Ford introduced the John Player Special limited edition in March 1975, but in May 1976, and with sales decreasing, the intermediate 3.0 GT models disappeared to give way for the upscale 3.0 S and Ghia designations. In October 1976, production was limited to the Saarlouis factory only, and the following year the Capri left the American market, after 513,500 models sold.

Ford Capri Mark III (1977–1986)

1985 Ford Capri 2.8 Injection Special in France
1985 Ford Capri 2.8 Injection Special in France

The Capri Mark 3 was referred to internally as "Project Carla", and although little more than a substantial update of the Mark 2, it was often referred to as the Mark 3. Ford only formally adopted the designation after the model ceased production.[citation needed] The first cars were available in March 1978, but failed to halt a terminal decline in sales. The concept of a heavily facelifted Capri 2 was shown at the 1976 Geneva show: a Capri 2 with a front very similar to the Escort RS2000 (with four headlamps and black slatted grille), and with a rear spoiler, essentially previewed the model some time before launch. The Mark 3 featured improved aerodynamics, leading to improved performance and economy over the Mark 2 and the trademark quad headlamps were introduced.

At launch the existing engine and transmission combinations of the Capri 2 were carried over, with the 3.0 S model regarded as the most desirable model although in truth the softer, Ghia derivative with automatic rather than manual transmission the bigger seller of the two V6 engined models.

The 3.0 S was used extensively in the TV series The Professionals, with characters Bodie driving a silver 3.0 S and Doyle a gold 3.0 S, which was credited with maintaining interest in the car in the UK.

Ford began to focus their attention on the UK Capri market as sales declined, realizing the car had something of a cult following there. Unlike sales of the contemporary 4 door Cortina, Capri sales in Britain were to private rather than fleet buyers who would demand less discounts, allowing higher margins with the coupé. Ford tried to maintain interest in 1979 with "X Pack" options from the performance oriented Rallye Sport parts range. Although expensive and slow selling these proved that the press would enthusiastically cover more developed Capris with higher performance.

In 1981, the 3.0 V6 powerplant was dropped from the line-up, while a new sporty version debuted at the Geneva Motor Show, called the 2.8 Injection. The new model was the first regular model since the RS2600 to use fuel injection. Power rose to 160 PS (118 kW) giving a top speed of 131 mph (211 km/h), but the car still had a standard four-speed gearbox. The Capri 2.8 Injection breathed new life into the range and kept the car in production 2-3 years longer than Ford had planned. The four-speed gearbox was replaced with a five-speed unit early on – at the same time Ford swapped the dated looking chequered seats for more luxurious looking velour trim. A more substantial upgrade was introduced in 1984 with the Capri Injection Special. This development used half leather seating and included a limited slip differential. Externally the car could be easily distinguished by seven spoke RS wheels (without the customary "RS" logo since this was not an RS vehicle) and color coded grille and headlamp surrounds. At the same time the 2-litre Capri was rationalized to one model the 2.0 S, which simultaneously adopted a mildly modified suspension from the Capri Injection. The 1.6 model was also reduced to one model, the 1.6 LS.

Although the Capri no longer had a racing career, Ford of Germany developed a limited edition, left hand drive only, turbocharged model with 188 hp (140 kW), which could propel the car to 220 km/h (137 mph) in April 1982. This wild looking derivative featured widened bodywork and "RS" badging of the engine and wheels. Although rare and collectible it was not regarded as a car of equal stature to the later Tickford - the other Ford "official" turbo Capri.

The Tickford Capri used the 2.8 Injection (rather than the RS model which strangely used the Granada carburettor engine) and developed 205 hp (153 kW) this version also featured a luxury interior with optional full leather retrim and Wilton carpeting and headlining, large rear spoiler, color coded front grille, deeper bumpers and 'one off' bodykit designed by Simon Saunders, later of KAT Designs and now designer of the Ariel Atom.

The independent tuner, Turbo Technics also released a 200 hp (149 kW) version, and a new 230 hp (171 kW) evolution which came supplied with a specially built gearbox. The Tickford Capri pricing issues (covered later) meant that Ford also sanctioned the Turbo Technics conversion as semi-official, although only the German RS and British Tickford ever appeared in Ford literature as official Ford products.

Rear disc brakes were standard on the Tickford which featured numerous other suspension modifications. This model was essentially rebuilt by hand by Tickford at approximately 200 hours per car, several of those dedicated to reshaping the leading edge of the bonnet to mate with the redesigned grille and body kit. It's still regarded as one of the most collectible Capri models today although at the time it struggled to sell even 100 units, despite extensive research and development costs. One problem was the relative price difference to the standard Capri Injection. To put this in perspective, the cost of the basic car doubled which would translate to a €30,000 coupé, such as a BMW 3 Series, being sold at €60,000 — or BMW M3 money.

From November 1984 onwards, the Capri was sold only in Britain, with only right hand drive cars were made from this date. The 1.6 and 2.0 variants were rebranded with a new trim level – "Laser" – which featured a fully populated instrument pod, leather gear lever, leather steering wheel and an electric aerial along with colour-coded grille and mirrors. The last run limited edition "Brooklands" Green, 280 model, featuring a limited slip differential, full leather Recaro interior and 15 inch versions of the seven spoke 13 inch wheels fitted to the superseded Capri Injection Special. Ford originally intended to make 500 turbo charged vehicles (by Turbo Technics) complete with gold alloy wheels and name it the Capri 500 but a change of production planning meant a name change to Capri 280 as the cars were simply the last models ran down the production line. A total of 1,038 Capri 280s were built. Contrary to some reports these cars were not called "Capri 280 Brooklands", the latter name of the famous Surrey race track only being applied to the paint colour rather than the car itself.

When the last Capri was made on December 19, 1986, 1,886,647 cars had rolled off the production line. Production had ended at Halewood, UK in 1976 and the Capri was made exclusively in Germany from 1976 to 1986. Most of those (more than a million) were the Mark 1, mostly because the Mark 1 sold well in North America and Australia, while the Mark 2 and Mark 3 were only exported outside Europe (to Asia and New Zealand) in limited numbers.

The Capri is remembered for the classic advertising slogan "The car you always promised yourself". A North American advertising campaign featured a shorter line: "Capri: The Sexy European".

Opel Kadett


Opel Kadett C


Production 1973–1979
Engine(s) 1.2 1.9 2.0

The Kadett C appeared in 1973, and was Opel's version of GM's 'T-Car', also built in Japan by Isuzu and sold as the Isuzu Gemini in Asian markets and Australia and many other names. In South Korea, Daewoo Motors built a version known as the Daewoo Maepsy. The Kadett C formed the basis of the British Vauxhall Chevette, which had a restyled front end, and used a 1256 cc OHV (over head valve) Vauxhall engine rather than the 1196 cc OHV Opel engine. It was notable for the inclusion of a hatchback version named City-Kadett, based on the UK Vauxhall Chevette hatchback, which was a first for Opel. Although Kadett C production ended in 1979, the Chevette was produced until January 1984. Interestingly, the Vauxhall Chevette was imported to Germany starting in 1979 to satisfy the needs of the rear wheel drive traditionalists and was quite a success for a year or two.

The Kadett C today is a cult car in Germany, especially in fastback Coupe form. The most sought after versions of the Kadett C Coupe are the Rallye and GT/E models. These models were built first with the Bosch fuel injected 1897 cc CIH (cam in head) Opel engine and followed by the updated 1998 cc CIH engine. Right hand drive (UK) versions of these sports models are now rarely seen.

A very rare version was the Aero-Kadett, an open-top Kadett with targa roll bar, detachable roof insert and a separate convertible top aft of the roll bar (like the contemporary Lancia Beta Spider (Lancia Zagato in the US). This car was built in very limited numbers by Karosserie Baur in Stuttgart.

The Kadett C reached America as the Buick–Opel. In reality, however, this was an Isuzu Gemini; an updated version of this car was marketed in the USA as the Isuzu I-Mark in the early Eighties.

In Brazil, the Kadett C was released six months before its European release as Chevrolet Chevette, and it was available with a choice of three gasoline engines, a 1.4 L, a 1.6 L and a 1.0 L (available only for 1992 and 1993 model year) and the 1.4 L and 1.6 L were also available on ethanol. This Chevette went through several redesigns - first a front and rear fascia similar to the Opel version, then a look similar to the British/American Chevette, and finally a design reminiscent of the updated American version. It was available in several different bodies: Hatchback (1979-1987), Station Wagon (called Chevrolet Marajó, 1980-1989), Pickup (Chevy 500, 1984-1995) and Sedan (1973-1993). The Chevette sold over 1.6 million units in Brazil, being replaced by the Chevrolet Corsa